- Grade: BILLIONS BLR-698.
- Pigment: Rutile TiO₂.
- Process: Sulfate.
- Inorganic treatment: Alumina and zirconia.
- Organic treatment: Present.
- Performance focus: Dispersion, opacity and gloss.
BLR-698 titanium dioxide
Description
BILLIONS™ BLR-698 is a sulfate-process rutile titanium dioxide pigment from LB Group. The manufacturer highlights its dispersion, opacity and gloss in waterborne and solvent-based systems, recommending it for architectural coatings, industrial coatings and printing inks.
Shobeir Shimi is an international trading company and supplier of industrial raw materials. Contact our team to discuss BLR-698 titanium dioxide, request technical documents and obtain a quotation based on your required quantity, packaging and delivery destination.
Choosing BLR-698 for a Coating Formulation
For a formulator, the practical question is whether a pigment achieves the required finish at an acceptable loading and processing cost. A nominal TiO₂ content alone cannot answer that question.
Start by defining the target coating: its binder system, gloss level, application method, film thickness and service conditions. Then compare BLR-698 with an approved reference under consistent conditions.
A useful assessment considers appearance and production together. The pigment should develop the required colour and coverage while allowing the formulation to meet its viscosity, application and storage requirements. These results provide a purchasing basis that a datasheet comparison alone cannot establish.
Applications
Architectural Paints
For interior paint, evaluate coverage, shade and finish at the intended application rate. Use the actual binder, extender and additive package rather than a simplified formulation that does not represent the commercial product.
For exterior paint, extend the assessment to the coating’s durability requirements. Initial colour and opacity are only part of approval; the finished formulation should also undergo the exposure testing appropriate to its intended use.
BLR-698’s application range does not mean that one formulation or dosage will suit every architectural coating.
Industrial Coatings
In industrial systems, assess the pigment on the intended substrate and with the specified curing conditions. Compare gloss, colour and opacity at a controlled dry film thickness.
Where the finished coating must meet adhesion, chemical resistance or other performance requirements, include those tests in the trial. Pigment selection should support the complete formulation rather than replace evaluation of the coating system.
For a glossy finish, examine both measured gloss and visual surface quality. Record the application conditions so that pigment-related differences can be distinguished from changes in film preparation.
Printing Inks
For printing ink development, evaluate BLR-698 at the intended deposited film thickness and on the actual substrate. Assess white coverage alongside viscosity, dispersion quality and print appearance.
Include the intended resin and solvent or aqueous vehicle in the evaluation. A successful coating trial does not automatically establish suitability for an ink formulation, even when the product uses the same pigment grade.
BLR-698 Titanium Dioxide Technical Specifications
The values below are manufacturer typical properties, except for the explicitly stated moisture maximum.
| Property | Value | Test Method / Reported Basis |
|---|---|---|
| TiO₂ content | 94% — typical | XRF |
| Moisture when packed | ≤ 0.5% | ISO 787-2 |
| Tamped bulk density | 1.2 g/cm³ — typical | ISO 787-11 |
| Oil absorption | 17 g/100 g — typical | ISO 787-5 |
| pH | 7.8 — typical | ISO 787-9 |
| Density | 4.1 g/cm³ — typical | ISO 787-10 |
| ISO 591 classification | R2 | — |
| CAS number | 13463-67-7 | — |
Typical values describe the grade’s characteristics. They should not be rewritten as guaranteed specification limits. Confirm the applicable TDS and purchase specification for the offered material.
BLR-698 and BLR-699: What Should Buyers Compare?
The two grades have overlapping application areas, but their published typical properties differ.
| Typical property | BLR-698 | BLR-699 |
| TiO₂ content | 94% | 95% |
| Oil absorption | 17 g/100 g | 18 g/100 g |
| Tamped bulk density | 1.2 g/cm³ | 1.1 g/cm³ |
These figures come from the respective manufacturer product pages.
The differences do not, by themselves, identify the better pigment for a particular formulation. Do not translate a difference in oil absorption directly into a guaranteed change in paint viscosity, or rank opacity solely by TiO₂ content.
Compare both candidates at a defined formulation and film thickness. If either formulation is subsequently optimised, document the changes and assess the resulting performance and cost.
Dispersion and Processing Evaluation
Use a repeatable trial procedure when introducing BLR-698. Record the addition sequence, dispersant package, pigment loading and equipment conditions.
Evaluate the dispersion stage and the finished product separately. A satisfactory grind result is useful, but approval should also include colour, opacity, viscosity and application appearance.
Agree the acceptance criteria before testing. Depending on the product, these may include:
- Colour difference against an approved standard.
- Coverage at a specified film thickness.
- Gloss and surface appearance.
- Dispersion endpoint and processing time.
- Viscosity after manufacture and storage.
- Relevant finished-coating or print-performance requirements.
No universal addition level or milling time is specified here. Establish these conditions for the formulation and production equipment in use.
Packaging, Storage and Documents
Manufacturer packaging options include 25 kg bags and flexible bulk containers. Confirm the available format when ordering.
Store indoors, protected from moisture and temperature extremes, and rotate stock on a first-in, first-out basis.
Request the documents needed for material approval:
- TDS: Grade description and technical characteristics.
- COA: Reported results for an identified production batch.
- SDS: Handling, storage and safety information.
Match the grade designation and batch details to the material being offered.
BLR-698 Titanium Dioxide Price and Supply
A BLR-698 titanium dioxide price inquiry should specify the required quantity, packaging, delivery destination and preferred delivery terms. Include technical acceptance criteria and document requirements before requesting a final offer.
When assessing quotations, compare the same supply scope. For formulation economics, also consider pigment consumption, processing effort and the cost of achieving an approved finished product.
Shobeir Shimi provides a commercial point of contact for sourcing inquiries. Availability, minimum order quantity, payment terms and dispatch timing are confirmed for each quotation.
Frequently Asked Questions
How should I assess BLR-698 for my paint formulation?
Test it in the intended binder and additive package. Compare opacity, colour, gloss, viscosity and application behaviour with your approved reference under consistent conditions.
Is BLR-698 interchangeable with BLR-699?
Not automatically. Review the technical documents and evaluate both grades in the intended formulation before approving a substitution.
Is the published TiO₂ content a guaranteed minimum?
No. It is listed as a typical property. Use the agreed specification and relevant batch documentation for purchasing acceptance.
What pigment dosage should I use?
Determine the loading through formulation trials based on the required coverage, finish and cost. The product page does not establish a universal dosage.
What are the MOQ and delivery time?
These are confirmed for the proposed order. Send your quantity, packaging preference and destination to receive the applicable supply terms.
Can I request a TDS, COA and SDS?
Include these requirements in your inquiry so document availability can be checked for the offered material.
Request a Quote for BILLIONS BLR-698
Send Shobeir Shimi your application, required quantity, packaging preference and delivery destination. Include any mandatory technical criteria to help us review your material requirements.






Reviews
There are no reviews yet.