- GRADE: HD52505
- DENSITY: 0.952 g/cm³
- Melt Flow Index: 5 gr/10min
- PRODUCER: JAM
- Packaging: 25 Kg
Description
HD 52505 UV is a UV-stabilized high-density polyethylene copolymer grade primarily used in injection molding applications. This material uses a gas phase process and offers good physical properties even at low temperatures.
Additives:
HD 52505 UV contains thermal antioxidants and UV stabilizers to enhance its resistance to degradation from heat and ultraviolet light exposure.
- Good physical property even at low temperatures
The excellent physical properties and UV resistance of HD 52505 UV make it suitable for a variety of injection molded products, including:
- Housewares
- Toys
- Outdoor products
The combination of good flowability and high stiffness allows this HDPE grade to be used in a wide range of injection molding applications, especially those requiring durable and impact-resistant products.
Resin Properties
| Property | Unit | Typical Value | Test Method |
| Melt Index (190°C/ 2.16Kg) | g/10 min | 5 | D1238 |
| Density | g/cm³ | 0.952 | D1505 |
Thermal Properties
| Property | Unit | Typical Value | Test Method |
| Vicat Softening Point | °C | 124 | D1525 |
Molded Properties
| Property | Unit | Typical Value | Test Method |
| Flectural Modulus | Mpa | 1200 | D790 |
| Tensile Strength at Yield | Mpa | 27 | D638 |
| Tensile Strength at Break | Mpa | 13 | D638 |
| HDT | °C | 67 | D648 |
| Notched Izod Impact @ 23 °C | J/m² | 9 | D256/A |
Be the first to review “HD52505 / HD 52505UV” Cancel reply
Reviews
There are no reviews yet.